
Carved Relief · Painted Doors
Low-relief carving worked directly into the panel face.
Specification
| Leaf thickness | 50 mm |
| Frame thickness | 35 mm |
| Standard opening | 2100 × 900 × 180 mm single leaf |
| Finish | Spray-applied PU coating, 5–8% sheen, UV-stabilised |
| Hardware | Not included |
Craft & construction
The panel face is carved in shallow relief — cut by hand, then sanded back between passes until the motif reads as a soft shadow rather than a hard line. Nothing is applied on top; the pattern is part of the panel itself.
Send the opening sizes, the quantity and the destination port. We will come back with a firm quote and a shop drawing, or tell you honestly if it cannot be built.
We reply within 24 hours, Mon-Sat.